Accessible Home Remodeling in Atlanta, GA
Atlanta Handicap Accessible homes
3 Ways To Make Your Home Accessible
Accessible Home Entrances
Accessible Home Bathrooms
Accessible Kitchen Spaces
Aging in Place Renovation in Atlanta, GA: What to Plan For
The most common context for accessible home remodeling in Atlanta, GA is aging in place: a homeowner or spouse who wants to stay in their current home as mobility changes, rather than moving to a care facility or downsizing. Planning an aging-in-place renovation means thinking ahead, with modifications that address current needs while anticipating future ones.
Glazer approaches aging-in-place renovation projects in Atlanta with a phased assessment: what needs to change now, what should be roughed in for later (elevator shafts, blocking behind bathroom walls, wider doorway framing), and what can wait. This approach minimizes disruption and cost while ensuring the home can be fully adapted as needs evolve.
Common aging-in-place modifications Glazer recommends and builds across metro Atlanta:
- Zero-threshold shower with blocking for future grab bar placement
- Blocking installed behind bathroom walls during any renovation for later grab bar mounting
- Main-level bedroom and full bathroom if not already present
- Widened doorways throughout the main level
- Lever hardware on all doors and faucets
- Improved lighting in hallways, stairwells, and exterior paths
- Stair lift installation or elevator shaft rough-in for future use
- Non-slip flooring throughout high-traffic areas
An experienced aging-in-place contractor in Atlanta understands both the construction requirements and the daily use patterns that determine which modifications deliver the most independence. Glazer works with occupational therapists and family members when appropriate so the renovation reflects how the homeowner actually lives in the space. For more on planning, see the National Aging in Place Council.
What Our Clients Say
Frequently Asked Questions
How much does accessible home remodeling cost in Atlanta, GA?
Costs vary significantly by scope. A focused bathroom accessibility renovation, including a roll-in shower conversion, grab bars, and a widened doorway, typically runs $15,000 to $40,000. A full accessible bathroom rebuild with complete layout changes commonly costs $30,000 to $60,000. A whole-home accessibility renovation covering entrances, bathrooms, kitchen, and interior modifications can run $80,000 to $200,000 or more, depending on the extent of the changes. Glazer provides a written, itemized estimate after an on-site assessment of the home’s specific conditions.
Do accessible home modifications require permits in Atlanta?
It depends on the scope. Cosmetic modifications, such as installing grab bars with proper blocking, replacing hardware with lever-style fittings, or adding non-slip flooring, typically do not require permits. Structural work such as widening doorways or removing walls, plumbing changes for roll-in shower conversions, and electrical upgrades require a building permit from the City of Atlanta, Fulton County, or DeKalb County, depending on your address. Glazer pulls every required permit and manages all inspections from start to finish.
What is aging-in-place remodeling and how is it different from standard renovation?
Aging-in-place remodeling is a planned approach to modifying a home so the homeowner can live there safely and independently as mobility, strength, or health changes, without moving to a care facility. It differs from standard renovation because design decisions are driven by accessibility, usability, and safety rather than purely aesthetic goals. Common modifications include zero-threshold showers, grab bars with structural blocking, widened doorways, main-level sleeping and bathing, lever hardware, and improved lighting. Glazer approaches these projects with a phased plan that addresses immediate needs and prepares the home for future changes.
What bathroom modifications does Glazer make for accessibility?
Glazer handles the full range of accessible bathroom modifications in Atlanta: roll-in shower conversions with curbless entries, fold-down shower benches, grab bars with proper structural blocking, comfort-height toilets with transfer clearance, tub-to-shower conversions, widened bathroom doorways, non-slip flooring, lever-style faucets, and full bathroom rebuilds with wheelchair turning radius clearance. Plumbing and structural modifications are permitted through the appropriate City of Atlanta or county office and managed with licensed subcontractors.
Can Glazer widen doorways in an existing Atlanta home?
Yes. Doorway widening is one of the most common accessible modifications Glazer handles in Atlanta. Standard accessible doorway width is 32 to 36 inches of clear opening. Most doors in older Atlanta homes, particularly pre-1990s construction, are 28 to 30 inches, which does not accommodate a standard wheelchair. Widening involves framing modification, which requires a permit in most Atlanta jurisdictions when it affects a load-bearing wall. Glazer assesses the structural implications of each doorway during planning, before any work begins.
How do I know what modifications my Atlanta home needs for accessibility?
The most reliable approach is a professional home assessment, either from an occupational therapist who specializes in home modification or from a contractor experienced in accessible renovation who can evaluate the home against the resident’s specific mobility needs. Glazer conducts on-site assessments and works with occupational therapists when clients have them involved. The assessment identifies current barriers, prioritizes modifications by impact, and separates changes needed now from those that can be phased in later.
Which Atlanta neighborhoods does Glazer serve for accessible home remodeling?
Glazer Design & Construction handles accessible home remodeling across metro Atlanta, including Buckhead, Sandy Springs, Brookhaven, Midtown, Druid Hills, Virginia-Highland, Decatur, Vinings, Dunwoody, East Atlanta, Roswell, Alpharetta, Marietta, and Avondale Estates. The company has hands-on experience with permitting in the City of Atlanta, Fulton County, DeKalb County, and Cobb County.
Serving Metro Atlanta’s Most Established Neighborhoods
Our work spans the full range of metro Atlanta neighborhoods — intown communities like Virginia Highlands, Midtown, and Cabbagetown, established suburbs like Sandy Springs, Dunwoody, and Roswell, and everything in between. Wherever your home is, we bring the same licensed crew, written contracts, and on-site project management.
Memberships & Associations
Glazer Design & Construction holds active memberships with the industry’s leading residential and green building organizations. These affiliations reflect our commitment to construction standards, energy efficiency, and professional accountability on every project we take on.
Need To Make Your Home More Accessible? We Can Help.
Contact us for a free quote at (404) 683-9848, email Randy@GlazerConstruction.com or complete our Fast Form below.







