General Contractor in Buckhead, GA
Since 1995, Glazer Design & Construction has served Buckhead homeowners and businesses as a licensed general contractor, managing renovations, custom builds, and new construction from permit to final walkthrough.
Experienced General Contracting Company in Buckhead
Glazer Design & Construction is a licensed general contractor in Buckhead, GA with an active project history across one of metro Atlanta’s most demanding residential markets. Buckhead properties range from large traditional homes on gated lots along West Paces Ferry Road and Tuxedo Road, to mid-century properties near Chastain Park, to high-rise condominiums in the Buckhead Village corridor, to newer custom builds throughout the neighborhood. Each property type comes with its own structural considerations, HOA or building management requirements, permit jurisdiction, and finish expectations. Glazer has worked across all of them since 1995.
Glazer is registered with the Georgia Secretary of State (Control No. 0330108, Active/Compliance) and permitted through the City of Atlanta and Fulton County. Every Buckhead project is managed under a written contract with a named project manager on-site, permits pulled by our team, and a milestone-based payment schedule that protects your investment at every stage of construction.
Buckhead’s residential market trades at some of the highest price points in metro Atlanta. Renovation work and new construction in this neighborhood require a general contractor who understands not just construction but the finish expectations, architectural character, and HOA or building management requirements that define quality in this market. That is what Glazer brings to every Buckhead project.
General Contracting Services in Buckhead, GA
As a licensed general contractor serving Buckhead, GA, Glazer manages the full scope of residential and light commercial construction work across the neighborhood. Services include:
- Whole-home renovations and interior remodels
- Kitchen and bathroom remodeling
- Custom home builds on Buckhead lots
- Structural modifications including wall removals and beam installations
- Home additions and second-story builds
- Basement finishing and attic conversions
- Exterior upgrades including siding, rooflines, and covered porches
- Outdoor living spaces, screened rooms, and outdoor kitchens
- Condominium renovations with building management coordination
- Light commercial build-outs and tenant improvements
Buckhead's older homes, particularly the large traditional properties along West Paces Ferry Road, Tuxedo Road, and around Chastain Park, frequently require structural assessment before renovation work begins. Wall removals, layout changes, and addition tie-ins on homes built before 1980 involve foundation, framing, and roof considerations that affect the permit scope and construction sequence. For condominium units, Glazer coordinates building management approval alongside the City of Atlanta permit process. Glazer assesses all of these conditions during the initial site visit, not after work has started.
Why Homeowners Trust Glazer Construction
Clear Communication from Start to Finish
Buckhead homeowners consistently cite communication failures as the most common problem with renovation contractors: not hearing back after a question, finding out about a delay after it has already affected the schedule, or receiving a change order without a clear cost explanation. Glazer's project manager is the single point of contact for every project and is responsible for proactive updates at each construction phase. You know what is happening on your project before you have to ask.
Quality Craftsmanship Built for Buckhead Homes
Buckhead's residential market has some of the highest property values and finish expectations in metro Atlanta. Renovation work that cuts corners, improperly set tile, cabinetry that is not level, exterior work that fails in Atlanta's humidity, does not hold up in a market where buyers, appraisers, and HOA architectural review boards notice the difference. Glazer uses licensed subcontractors in every trade, specifies materials appropriate for Atlanta's climate and the neighborhood's standards, and conducts a final walkthrough on every project before closing it out.
Organized and Accountable Project Management
A general contractor in Buckhead, GA is managing subcontractor schedules, material deliveries, permit inspections, HOA approval timelines, and client communication simultaneously across every active project. Glazer's project management process, written scope, milestone-based payments, documented change orders, and inspection coordination, is designed to prevent the scheduling gaps and accountability voids that cause most renovation projects to run over time and over budget.
Home Additions and Custom Builds in Buckhead, GA
Home additions and custom builds are among the most complex general contractor services Glazer handles in Buckhead. For homeowners who want to stay in the neighborhood rather than move to get more space, a well-planned addition or teardown-rebuild is frequently the most cost-effective path. Buckhead’s location, established character, school access, and proximity to Atlanta’s commercial core make it a neighborhood worth investing in rather than leaving.
Glazer builds primary suite additions on the main level, second-story additions over existing single-story footprints, detached garage and carriage house structures, sunrooms and screened room additions, and full custom homes on Buckhead lots. For teardown-rebuild projects in Ashford Park and Lynwood Park, Glazer evaluates the existing structure during the site assessment to confirm the approach is right for the specific lot.
Every addition and new build in Buckhead requires structural engineering, architectural coordination, and a full building permit through the City of Atlanta or Fulton County. HOA architectural review is an additional approval layer in many Buckhead neighborhoods. Glazer manages the complete process, as a remodeling contractor in Buckhead, GA with active experience across these project types, from initial site assessment and design coordination through permit submission, construction, inspections, and final certificate of occupancy.
What Our Clients Say
Frequently Asked Questions
How much does a general contractor charge in Buckhead, GA?
General contractor fees in Buckhead typically run 10 to 20 percent of the total project cost depending on scope and complexity. For whole-home renovations, kitchen or bathroom remodels, or home additions in Buckhead, project costs commonly range from $60,000 to $500,000 or more depending on size, finish level, and structural complexity. Custom home builds on Buckhead lots commonly exceed $1,000,000 in construction cost before land and design fees. Glazer provides a written, itemized estimate after an on-site assessment so you have a clear number before committing to any scope of work.
Is Glazer a licensed general contractor in Buckhead, GA?
Yes. Glazer Design & Construction is licensed and insured, registered with the Georgia Secretary of State (Control No. 0330108, Active/Compliance). Georgia law requires any contractor performing work over $2,500 to hold a valid state license. Glazer has operated as a licensed general contractor serving Buckhead and surrounding Fulton County neighborhoods since 1995. You can verify Glazer’s registration at ecorp.sos.ga.gov.
Does Glazer handle condominium renovations in Buckhead?
Yes. Condominium renovations in Buckhead involve an additional layer of coordination beyond the standard City of Atlanta permitting process. Most Buckhead condominium buildings require building management approval of renovation plans before work begins, restrict construction hours, and require licensed and insured contractors to be registered with the building. Glazer is experienced with these requirements and coordinates the building approval process alongside the city permit application so both are in place before work starts.
What types of projects does Glazer handle as a general contractor in Buckhead?
Glazer handles the full range of residential and light commercial general contractor work in Buckhead: whole-home renovations, kitchen and bathroom remodels, custom home builds, home additions, second-story builds, basement finishing, attic conversions, structural modifications, outdoor living spaces, screened rooms, condominium renovations, and light commercial build-outs. Buckhead’s housing stock ranges from large traditional homes and mid-century properties to high-rise condominiums and newer custom builds, and Glazer has active project experience across all of these property types.
How long does a renovation project take with Glazer in Buckhead?
Timeline depends on scope. A single-room renovation such as a kitchen or bathroom remodel typically runs six to twelve weeks in Buckhead, accounting for City of Atlanta permit review and any building management approval for condominium units. A whole-home interior renovation runs two to four months. A home addition or second-story build takes four to eight months from permit approval. A full custom build on a Buckhead lot commonly takes 12 to 18 months from permit approval to certificate of occupancy. Glazer builds permit lead times into the project schedule before work starts.
How does Glazer handle change orders on Buckhead renovation projects?
Every change to the original project scope is documented in a written change order that states the additional cost and any impact on the project timeline before the additional work begins. Glazer does not proceed with scope changes based on verbal agreements or add costs to the final invoice without prior written approval. This process protects both parties and is one of the most common concerns Buckhead homeowners raise when evaluating general contractors, based on negative experiences with contractors who add costs at the end of a project without prior documentation.
How do I get started with Glazer for a project in Buckhead, GA?
Contact Glazer at (404) 683-9848 or through the form on this page to schedule a free on-site consultation at your Buckhead property. Glazer assesses the existing conditions, discusses your goals and budget, and follows up with a written, itemized estimate. There is no obligation to proceed after the consultation. Projects in Buckhead are typically ready to scope within one to two weeks of the initial consultation depending on project complexity.
Serving Metro Atlanta’s Most Established Neighborhoods
Our work spans the full range of metro Atlanta neighborhoods — intown communities like Virginia Highlands, Midtown, and Cabbagetown, established suburbs like Sandy Springs, Dunwoody, and Roswell, and everything in between. Wherever your home is, we bring the same licensed crew, written contracts, and on-site project management.
Memberships & Associations
Glazer Design & Construction holds active memberships with the industry’s leading residential and green building organizations. These affiliations reflect our commitment to construction standards, energy efficiency, and professional accountability on every project we take on.
Ready to Start Your Buckhead Project?
Every successful renovation starts with the right general contractor and a clear plan. Whether you are planning a whole-home renovation, a home addition, a kitchen or bathroom remodel, or a custom build on a Buckhead lot, Glazer Design and Construction has managed projects like yours across this neighborhood since 1995. Licensed, permitted, and locally experienced. The starting point is a free on-site consultation with no obligation to proceed.